Site-tensile tester

Product Description

Features:

• DVS-R 2225, Part 2 Joining of Lining Membranes Made of Polymer Materials in Geotechnical and Hydraulic Engineering Site Testing
• DVS-R 2225, Part 4, Welding of sealing sheets made of polyethylene (PE) for the sealing of dumps and contaminated sites (DVS-R 2226, Part 3, Test of fusions on PE liners  Peeling Test)
• DVS-R 2227, Part 1 Welding of semi-finished products made of high-density polyethylene (PE-HD) for sealing of concrete structures in the field of ground water protection and for corrosion protection (DVS-R 2203, Part 2 Testing of welded joints between panels and pipes made of thermoplasticsTensile test)n
• pressure cylinder
• Testing Speed 55 mm/min

Range of Application:

Manufacture of reservoirs, tanks and containers, manufacture of plastic apparatus, ventilation systems, water treatment systems, scrubbers, environmental technology, swimming pools, transport and logistics

• Testing of Lining Membranes Geotechnical and Hydraulic Engineering Site Testing
• Testing of Lining Membranes for the sealing of dumps and contaminated sites
• Sealing of concrete structures in the field of ground water protection and for corrosion protection
• 
  

Technical Data	Site-tensile tester Item no. 20564
Testing basis:	DVS-R 2225, part 4, sector 6.4.3 DVS-R 2227, part 1, sector 9.4
Inspection method:	Peel test according to DVS 2225-4/2226-3 Tensile test according to DVS 2203-2
Test speed:	50 mm/min; Tolerance +/- 5,0 %
Width of probe (mm):	up to 30
Thickness of probe (mm):	up to 5
Tensile force:	2.000 N
Material of probe:	PE-HD, PE-LD
Drive:	Electromotive, 220 V, spindledrive with shaft joint forward and backward motion to basic position
Fixing length (mm):	5 - 200, (clearance between the clamping jaws)
Chuck jaws:	Inner surface knurled clamping lever M10, centered clamping, lateral support of clamping jaws
Mark of conformity:	CE